Save your Keystore File (UTC / JSON)

DOWNLOAD Keystore File (UTC / JSON)

Do not lose it! It cannot be recovered if you lose it.

Do not share it! Your funds will be stolen if you use this file on a malicious/phishing site.

Make a backup! Secure it like the millions of dollars it may one day be worth.

I understand. Continue.

Not Downloading a File?

  • Try using Google Chrome
  • Right click & save file as. Filename:

Don't open this file on your computer

  • Use it to unlock your wallet via MyEtherWallet (or Mist, Geth, Parity & other wallet clients.)

Guides & FAQ

+-

Unlock your wallet to see your address

DOWNLOAD
Print Paper Wallet
Your Address:
Private Key (unencrypted)

You arrived via a link that has the address, amount, gas or data fields filled in for you. You can change any information before sending. Unlock your wallet to get started.

+-

Send Ether & Tokens

Send Entire Balance

+ Advanced: Add Data

A message regarding {{tx.to}}

{{customGasMsg}}

Warning! You do not have enough funds to complete this swap.

Please add more funds to your wallet or access a different wallet.

Advanced Users Only.
Current Rates

ETH = {{bity.curRate.ETHBTC*priceTicker.ETHBTC | number: 6}} BTC

ETH = {{bity.curRate.ETHREP*priceTicker.ETHREP | number: 6}} REP

BTC = {{bity.curRate.BTCETH*priceTicker.BTCETH | number: 6}} ETH

BTC = {{bity.curRate.BTCREP*priceTicker.BTCREP | number: 6}} REP

Your Information

{{swapOrder.fromVal}} {{swapOrder.fromCoin}}

Amount to send

{{swapOrder.toVal}} {{swapOrder.toCoin}}

Amount to receive

{{swapOrder.swapRate}} {{swapOrder.swapPair}}

Your rate

Start Swap
Your Information

{{orderResult.reference}}

Your reference number

{{orderResult.progress.timeRemaining}}

Time remaining to send

Time elapsed since sent

{{orderResult.output.amount}} {{orderResult.output.currency}}

Amount to receive

{{swapOrder.swapRate}} {{swapOrder.swapPair}}

Your rate

1

Order Initiated

2

Waiting for your {{orderResult.input.currency}}...

3

{{orderResult.input.currency}} Received!

4

Sending your {{orderResult.output.currency}}
Waiting for 10 confirmations... Waiting for 1 confirmation...

5

Order Complete

Please send {{orderResult.input.amount}} {{orderResult.input.currency}} to address
{{orderResult.payment_address}}

+-
Unlock your wallet to send ETH or Tokens directly from this page.
Warning! You are not connected to an ETH node.
Please use the node switcher in the top-right corner to switch to an ETH node. We do not support swapping ETC or Testnet ETH.

Send Entire Balance

+ Advanced: Add Data

A message regarding {{tx.to}}

{{customGasMsg}}

Warning! You do not have enough funds to complete this swap.

Please add more funds to your wallet or access a different wallet.

Advanced Users Only.

Orders that take too long will have to be processed manually & and may delay the amount of time it takes to receive your coins.
Please use the recommended TX fees seen here.

Issue with your Swap? Contact support

Click here if link doesn't work

Generate & Send Offline Transaction

Step 1: Generate Information (Online Computer)

GENERATE INFORMATION

Step 3: Send / Publish Transaction

Paste the signed transaction from Step 2

SEND TRANSACTION

Read / Write Contract

{{ contract.address }}

Please change the address to your Multisig Address to your own address.

  1. Generate EOS Key-pair
  2. Register / Map your EOS Key
    • Select register
    • Enter your EOS Public Key <--- CAREFUL! EOS PUBLIC KEY!
    • Unlock wallet
    • Amount to Send: 0 · Gas Limit: at least 90000
  3. Fund EOS Contract on Send Page
    • Go to Send Ether & Tokens Page
    • Unlock same wallet you are unlocking here.
    • Send Amount you want to Contribute to 0xd0a6E6C54DbC68Db5db3A091B171A77407Ff7ccf
    • Gas Limit: at least 90000
  4. Claim EOS Tokens
    • Select claimAll.
    • Unlock wallet
    • Amount to Send: 0 · Gas Limit: at least 90000

TRUE FALSE

Byte Code:

Gas:

Raw Transaction

Signed Transaction


ENS

The Ethereum Name Service is a distributed, open, and extensible naming system based on the Ethereum blockchain. Once you have a name, you can tell your friends to send {{ajax.Req.type}} to mewtopia.{{objENS.tld}} instead of 0x7cB57B5A97eAbe942......


The ENS is only available on the ETH, ETC, and Ropsten (Testnet) chains. You are currently on the {{ajaxReq.type}} chain.
Please use the node switcher in the upper right corner to select "ETH", "ETC", or "Ropsten".

What is the process like?

+- 1. Preparation
  • Decide which account you wish to own the name & ensure you have multiple backups of that account.
  • Decide the maximum amount of {{ajaxReq.type}} you are willing to pay for the name (your Bid Amount). Ensure that account has enough to cover your bid + 0.01 {{ajaxReq.type}} for gas.
+- 2. Start an Auction / Place a Bid
  • Bidding period lasts 3 days (72 hours).
  • You will enter the name, Actual Bid Amount, Bid Mask, which is protected by a Secret Phrase.
  • This places your bid, but this information is kept secret until you reveal it.
+- 3. Reveal your Bid
  • If you do not reveal your bid, you will not be refunded.
  • Reveal Period lasts 2 days (48 hours).
  • You will unlock your account, enter the Bid Amount, and the Secret Phrase.
  • In the event that two parties bid exactly the same amount, the first bid revealed will win.
+- 4. Finalize the Auction
  • Once the auction has ended (after 5 days / 120 hours), the winner needs to finalize the auction in order to claim their new name.
  • The winner will be refunded the difference between their bid and the next-highest bid. If you are the only bidder, you will refunded all but 0.01 {{ajaxReq.type}}.
+- More Information

Help Center: ENS  ·  Debugging a [BAD INSTRUCTION] Reveal

Please try the above before relying on support for reveal issues as we are severely backlogged on support tickets. We're so sorry. :(



{{objENS.name}}{{objENS.tld}} is not yet available.

{{objENS.name}}{{objENS.tld}} not available. (Forbidden)

Auction Open On

{{objENS.allowedTime.toString()}}

Auction Opens In

{{objENS.timeRemaining}}



An auction has been started for {{objENS.name}}{{objENS.tld}}.

{{objENS.name}}{{objENS.tld}} is available!

Reveal Bids On

{{getRevealTime().toString()}}

{{objENS.timeRemainingReveal}}

Auction Closes On

{{objENS.registrationDate.toString()}}

{{objENS.timeRemaining}}



It's time to reveal the bids for {{objENS.name}}{{objENS.tld}}.
Current highest bid is {{objENS.highestBid}} {{ajaxReq.type}}.

Auction Closes On

{{objENS.registrationDate.toString()}}

{{objENS.timeRemaining}}



{{objENS.name}}{{objENS.tld}} is already owned:

Name: {{objENS.name}}{{objENS.tld}}
Labelhash ({{objENS.name}}): {{objENS.nameSHA3}}
Namehash ({{objENS.name}}{{objENS.tld}}): {{objENS.namehash}}
Owner: {{objENS.owner}}
Highest Bidder (Deed Owner): {{objENS.deedOwner}}
Resolved Address: {{objENS.resolvedAddress}}
+-

Do you want {{objENS.name}}{{objENS.tld}}? Unlock your Wallet to Start an Auction Do you want {{objENS.name}}{{objENS.tld}}? Unlock your Wallet to Place a Bid Did you bid on {{objENS.name}}{{objENS.tld}}? You must reveal your bid now. Is that your address? Finalize the auction to claim your new name. Is that your address? It is ready to set up a resolver.

Place a Bid Start an Auction Reveal your Bid

-- 👆 enter automagically 👆 -- or -- 👇 enter manually 👇 --
Actual Bid Amount

You must remember this to claim your name later.

Bid Mask

This is the amount of {{ajaxReq.type}} you send when placing your bid. It has no bearing on the *actual* amount you bid (above). It is simply to hide your real bid amount. It must be >= to your actual bid.

Secret Phrase

You must remember this to claim your name later (feel free to change this)

If you haven't done so already, please screenshot & save the below information.

Please check your address on https://etherscan.io/ to ensure your BID TX is on the blockchain, without errors.

Name{{objENS.name}}{{objENS.tld}}
Actual Bid Amount{{objENS.bidValue}} {{ajaxReq.type}}
Bid Mask{{objENS.dValue}} {{ajaxReq.type}}
Secret Phrase{{objENS.secret}}
From Account{{wallet.getChecksumAddressString()}}
⚠ Reveal Date ⚠{{getRevealTime().toString()}}
Auction Ends{{objENS.registrationDate.toString()}}

Copy and save this:

Click your TX hash to see if you successfully revealed your {{objENS.bidValue}} bid for {{objENS.name}}{{objENS.tld}}.

Please return on {{objENS.registrationDate.toString()}} to finalize the auction and see if you won!




Finalizing this name assigns the ENS name to the winning bidder. The winner will be refunded the difference between their bid and the next-highest bid. If you are the only bidder, you will refunded all but 0.01 ETH. Any non-winners will also be refunded.


This account is not the owner of {{objENS.name}}{{objENS.tld}}. Please unlock the Owner Account in order to resolve.
Name: {{objENS.name}}{{objENS.tld}}
Labelhash ({{objENS.name}}): {{objENS.nameSHA3}}
Namehash ({{objENS.name}}{{objENS.tld}}): {{objENS.namehash}}
Owner: {{objENS.owner}}
Highest Bidder (Deed Owner): {{objENS.deedOwner}}
Resolved Address: {{objENS.resolvedAddress}}
Enter the address you would like this name to resolve to:

Set the Resolver for your Name

  1. Go to the contracts tab.
  2. Choose ENS - Registry: 0x314159265dD8dbb310642f98f50C066173C1259b. Click "Access".
  3. Select setResolver.
  4. Enter the Namehash of your name under "node (bytes32)".
    • node (bytes32): {{objENS.namehash}}
  5. Enter the Public Resolver Address under "resolver (address)".
    • resolver (address): 0x5FfC014343cd971B7eb70732021E26C35B744cc4
  6. Unlock the owner's account.
  7. Click WRITE.
  8. Generate and send this transaction – leave "Amount to Send" as 0
  9. TX should look like this.

Set the Address That your Name will Resolve To

  1. Go to the contracts tab.
  2. Choose ENS-Public Resolver: 0x5FfC014343cd971B7eb70732021E26C35B744cc4. Click "Access".
  3. Select setAddr.
  4. Enter the Namehash of your name under "node (bytes32)".
    • node (bytes32): {{objENS.namehash}}
  5. Enter the Address you would like to resolve to under "addr (address)".
    • addr (address): {{newResolvedAddress}}
  6. Unlock the owner's account.
  7. Click WRITE.
  8. Generate and send this transaction – leave "Amount to Send" as 0
  9. TX should look like this.

DexNS

Decentralized Naming Service

DexNS is a distributed, open-source name service based on Ethereum Classic smart-contracts. You can register human-readable names for personal use, names for smart-contracts or symbolic names for your tokens.

DexNS supports all names without any limitations, but it is recommended to use only letters and numbers without white spaces.

Registration of the Name will cost you {{ priceDEXNS }}, and you will own each registered name for 1 year. You can also extend the term of ownership of the Names before the expiry date, but you must pay the name price again to extend name binding period.


You are going to register:

{{ DexNSName }}

+-

View Wallet Details

This page allows you to download different versions of private keys and re-print your paper wallet. You may want to do this in order to [import your account into Geth/Mist](http://ethereum.stackexchange.com/questions/465/how-to-import-a-plain-private-key-into-geth/). If you want to check your balance, we recommend using a blockchain explorer like etherscan.io.

DOWNLOAD
Print Paper Wallet
Your Address:
Private Key (unencrypted)

Check TX Status

Transaction Found

{{ tx.hash }}

Transaction Not Found

Pending Transaction Found

Transaction Details


TX Hash {{ txInfo.hash }}
From Address {{ txInfo.from }}
To Address {{ txInfo.to }}
Amount {{ txInfo.valueStr }}
Nonce {{ txInfo.nonce }}
Gas Limit {{ txInfo.gasLimit }}
Gas Price {{ txInfo.gasPrice.gwei }} GWEI ({{ txInfo.gasPrice.wei }} WEI)
Data {{ txInfo.data }}


Cancel or Replace Transaction

+-

Unlock your wallet to replace your transaction. (But, please be careful)

Send Entire Balance

+ Advanced: Add Data

A message regarding {{tx.to}}

{{customGasMsg}}

Warning! You do not have enough funds to complete this swap.

Please add more funds to your wallet or access a different wallet.

Advanced Users Only.
Please unlock the address {{ txInfo.from }}. Only this address can replace a TX.

Bulk Generate Wallets

Number of Wallets To Generate

Generate Wallets

Generate Wallets

Success! Your wallets have been generated.

**You need your Keystore File + password or Private Key** to access this wallet in the future. Please save & back it up externally! There is no way to recover a wallet if you do not save it. Read the [help page](https://www.myetherwallet.com/#help) for instructions.
Address Identicon Address Private Key (unencrypted)

Bulk Generate Wallets

Number of Wallets To Generate

Generate Wallets

Generate Wallets

Success! Your wallets have been generated.

**You need your Keystore File + password or Private Key** to access this wallet in the future. Please save & back it up externally! There is no way to recover a wallet if you do not save it. Read the [help page](https://www.myetherwallet.com/#help) for instructions.
Address Identicon Address Private Key (unencrypted)